Tamper-resistant 6-digit DC hour meter has solid state circuitry designed for a long service life. Electro-mechanical indicator that cannot be erased. No battery back up required. Quartz crystal provides accurate timing. Space terminal are standard on this series, but wire leads can be ordered as an option.
The unit T14 series is an attractive. Round 3-hole bezel mount. Standard unit is supplied with spade terminals, but wire leads can be ordered as an option.
The T14 series hour meter in a functional two-hole mounting style. Standard unit is supplied with wire leads, but spade terminals can be ordered as an option.
(6)
Tamper-resistant 5-digit AC hour meters have solid state electronic drive circuitry designed for a long service life. Electromechanical indicator cannot be erased. No battery back up required. Quartz crystal provides accurate timing. Wire leads are standard on this series, but spade terminals can be ordered as an option.
(6)
The T18 series is an attractive round 3-hole bezel mount. Standard unit is supplied with wire leads, but spade terminals can be ordered as an option.
(6)
The T18 series hour meter is a functional 2-hole mounting style. Standard unit is supplied with wire leads, but spade terminals can be ordered as an option.
(5)
Series T32 is a 7-digit synchronous motor driven hour meter in AC voltage and stepper motor driven in DC. This hour meter can withstand even the most rugged applications. The completely insulated housing provides substantial protection against environmental influences. Suitable for .48 mm and 50.8 mm (2.0 inch) dia. panel cut-out.
(4)
The standard T32 series is a DIN rail mount which is useful when panels are not available. This hour meter is driven by a synchronous motor in AC and a stepper motor in DC. The completely insulated housing provides substantial protection against environmental influences.
Series T33 miniature hour meters are 7-digit quart crystal controlled impulse counters. Low power consumption makes this series ideal for applications where power consumption is critical. The panel mounted version which includes a snap-on spring clip for quick mounting.
(11)
This series T34 hour meter is a 6-digit resettable electro-mechanical hour meter. Ideal for interval timing where accumulated hours is not needed. This hour meter is driven by a synchronous motor with the same accuracy as non-resettable models.
(11)
This series T34 hour meter is a 6-digit resettable electro-mechanical hour meter. Ideal for interval timing where accumulated hours is not needed. This hour meter is driven by a synchronous motor with the same accuracy as non-resettable models.
(2)
ENM's series T40 DC hour meter is the answer to applications requiring a low power, economical, and reliable hour meter. This compact, tamper-resistant meter is sealed against the environment to provide years of service. A quartz crystal time base insures super-silent operation and accurate time keeping.
ENM's series T40 DC hour meter in a large 3-hole flange. NEMA 4X, 12 rated panel gasket available for water and corrosion resistant panel mounting. Completely sealed design. A quartz crystal time base insures super-silent operation and accurate time keeping.
This is the standard T40 series in the attractive 52 mm panel mount. It has all the standard features which include a 6-digit display, low power requirements, large voltage range, and an environmentally sealed case. A quartz crystal time base insures accurate time keeping.
This is the standard T40 series with a switch that automatically senses output from an engine's alternator. Includes protection from alternator load dump. Inductive switching and reverse polarity while keeping the accuracy of the quartz crystal time base.
(2)
This series T41 DC hour meter is ideal for applications requiring a low power, reliable, and economical hour meter. This compact tamper resistant device is sealed against the environment to provide years of reliable service. The solid state electronic circuit is a low power design that insures accurate time keeping over a range of voltages. The high impact plastic case is sealed against the environment. This model is also polarity insensitive.
(2)
This panel mount version of the T41 series is secured with an easy to install spring clip. No fasteners are required. This unit has all the standard features which includes a 6-digit display, low power design, and a water sealed case. This model is also polarity insensitive.
(4)
ENM's T50 series low power AC hour meter is the answer to applications requiring a low power, economical, and reliable hour meter. This compact tamper-resistant meter is sealed against the environment to provide years of service. A quartz crystal time base insures accurate time keeping. This model is also frequency insensitive.
(7)
ENM's series T50 DC hour meter in a large 3-hole flange. NEMA 4X. 12 rated panel gasket available for water and corrosion resistant panel mounting (see accessories). A quartz crystal time base insures accurate time keeping. This model is also frequency insensitive.
(3)
This is the standard T50 series is the attractive 52 mm panel mount. This hour meter has all the standard features which include a 6-digit display, low power requirements, wide voltage range, and an environmentally sealed case. This model is also frequency insensitive.
(6)
This is the 52 mm panel mount version of the T50 series with a printed aluminum face plate. The unit has all the standard features of the T50 series including low power requirements, quartz crystal time base, and a water sealed case, A 4-hole version is also available. Black anodized dial plates also available.
(3)
The T51 series hour meter is the AC version of the T41 series. The electronics are driven by the same quartz crystal time base. The T51 was designed for use on test and recording equipment provide maintenance control, and for establishing warranty programs. This unit is also water sealed and frequency insensitive.
(3)
This panel mounted hour meter is secured with an easy to install spring clip. No additional fasteners required. This unit is also water sealed and frequency insensitive.
(2)
The T60 series engine powered hour meter was originally designed for use on lawnmowers, but new circuitry allows this series to be used on any engine which is powered by a magneto or alternator.
(2)
The T61 series hour meter is specifically designed to be used for engine power. The first model is powered by the alternator of a two-stroke or four-stroke engine. A special circuit design compensates for alternator noise and operates over a large range of voltages. A second unit can be powered by the magneto of a two-stroke engine. Some applications include lawnmowers, pumps, farm equipment, or use on anything that is engine powered.
(2)
The T61 series hour meter is specifically designed to be used for engine power. The first model is powered by the alternator of a two-stroke or four-stroke engine. A special circuit design compensates for alternator noise and operates over a large range of voltages. A second unit can be powered by the magneto of a two-stroke engine. Some applications include lawnmowers, pumps, farm equipment, or use on anything that is engine powered.
(4)
ENM’s Series T55 electro-mechanical hour meter is a new design which incorporates the great accuracy found in our other products. The T55 series are available in either reset or non-resettable version.
The meter can be used for indication of machine runtime or time between service for maintenance purposes.
The T55 series is durable and can operate over a wide range of temperature. Recorded data will be retained if power is lost.
